Product ID:101, AMERCOAT THINNER
MSDS Date:03/10/1989
FSC:8010
NIIN:00N033161
MSDS Number: BPTCB

AMERON PROTECTIVE COATINGS

201 NORTH BERRY STREET
BREA, CA 92622
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 714-529-1951

Preparer: H. KLINE

Cage: 0Y2E4

AMERON PROTECTIVE COATINGS

1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

SOLVENT NAPHTHA; (AROMATIC HYDROCARBON >C9).

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: 87%

OSHA PEL 100 PPM (MFR)

(ORAL,RAT)1.2 G/KG

CAS: 91-20-3

RTECS: QJ0525000

Fraction By Weight: 10%

OSHA PEL 10 PPM; 15 STEL

ACGIH TLV: 10 PPM; 15 STEL

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

BENZENE, TRIMETHYL-(MIXED ISOMERS); (TRIMETHYL BENZENE)

CAS: 25551-13-7

Fraction By Weight: 3%

OSHA PEL 25 PPM

ACGIH TLV: 25 PPM

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPOR, SPRAY MIST &/OR DUST CAN BE
HARMFUL, IRRITATING TO SKIN, MUC MEMB, EYES & RESP SYS. EXCESSIVE
INHAL CAN CAUSE HDCH, NAUS, DIZZ/ASPHY. RPTD & PRLNG OCCUP OVEREXP
TO SOLVENTS IS ASSOC W/ PERM BRA IN & NERV SYS DAM. CAN BE HARMFUL
IF INHALED OR ABSORBED THRU SKIN. OVEREXP CAN DAM KIDNEYS & LIVER,
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: BLOOD, LUNGS, CNS.
Medical Cond Aggravated by Exposure:KIDNEY AND LIVER DISORDERS. BLOOD
DISORDERS.

First Aid:INHAL: PROVIDE FRESH AIR; IF BREATHING LABORED, GIVE O2/ARTF
RESP. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. EYES: FLUSH
IMMEDIATELY WITH PLENTY OF WATER FOR @ LEAST 15 MINUTES & GET
MEDICAL ATTENTIO N. INGEST: DRINK 1-2 GLASSES OF WATER TO DILUTE.
DO NOT INDUCE VOMITING. CONSULT PHYS/POIS CONTROL CENTER
IMMEDIATELY. TREAT SYMPTOMATICALLY.

Flash Point Method:SCC
Flash Point:145F,63C
Lower Limits:0.50%
Upper Limits:6.40%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS & OPEN FLAME.

Spill Release Procedures:AVOID BREATHING OF VAPORS/DUST. USE ABSORBENT
CLEANUP MATERIALS OR SWEEP UP. PLACE IN SEPARATE CONTAINER. KEEP
OUT OF PUBLIC SEWERS & WATERWAYS. IF ENTRY IS THREATENED OR OCCURS,
NOTIFY LOCAL AUTHORIT IES. ELIMINATE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID STORAGE
TEMPERATURES ABOVE 100F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
DUST, VAPS/SPRAY MIST OR CONTACT WITH SKIN/EYES. DO NOT WELD/FLAME
CUT AN EMPTY CONTAINER. GROUND CONTAINERS WHEN POURING.

Respiratory Protection:NIOSH/MSHA APPRVD CERTIFIED RESP. FOR SPEC IF
CNDTN REFER TO NIOSH POCKET GUIDE TO CHEM HAZ, DHEW NO-78-210. USE
NIOSH/ MSHA APPRVD AIR-LINE RESP IN CONFINED/RESTRICTED VENT AREAS,
OR W/ POLYURETHANE/ ISOCYANATES. REFER TO 29 CFR, (SUPP DATA
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIM. REMOVE WELDING (SUPP DATA)
Protective Gloves:NEOPRENE OR OTHER SUITABLE.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD(FP ).
Other Protective Equipment:FULL PROTECTIVE CLOTHING, SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THORO BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
RESP PROT: OSHA PARTS 1910,1915, & 1916 FOR COATING OPERATIONS. VENT:
OR FLAME CUTTING DECOMPOSITION PRODUCTS. REFER TO 29 CPR, OSHA
PARTS 1910,1915, & 1916 FOR COATING OPERATIONS.

HCC:V4
Boiling Pt:B.P. Text:>329F,>165C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.89
Evaporation Rate & Reference:0.13(BUTYL ACETATE=1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:BY FIRE, BURNING OR WELDING: CO & CO2.

Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.